23BWDBH

23BWDBH

Window Mount Thermo Ventilator (AdvanceType)

HK$ 3,380

Highlights

Window Mount Installation
Max. Wattage 1,400 W
Ventilation Air Volume : 220 m3/h
Ventilation / Heating / Dry Hot (Clothes Drying) / Dry Cool (Circulation) Feature
Auto / Manual Swing Operation
Alleru-buster Filter
Pre-set Timer Control Feature
New RF Remote Control with magnetic bottom box cover

Feature

Window Mount Installation
Duct Installation is Not Required
Ventilation Wattage : 34 W
Maximum Power Consumption : 1,400 W
Ventilation Speed Up to 220 m3/h
Power Source : 6A
Ventilation / Heating / Dry Hot ( Clothes Drying ) / Dry Cool ( Circulation ) Feature
Auto / Manual Swing Operation
Antibacterial Filter
Heater : PTC
New RF IPX4 Remote Control with Magnetic Base ( Need to Pair with The Product Before Use )
Smaller Installation Size with Dimension of 242 ( H ) x 238 ( W ) mm
Louver Size ( mm ) : 280 ( H ) x 280 ( W ) x 286 ( D )
Pre-set Timer Control Feature
Max. Time - Heat : 180 mins / Vent. CONT. / Dry Hot : 360 mins / Dry Cool : CONT.

Specifications

		23BWDBH

		23BWDBH
Power Source		13 A
Wattage	Ventilation	34 W
Wattage	Max. Wattage	1,400 W
Air Volume	Ventilation	220 m3/h
Noise Level	Ventilation	48 dB
Noise Level	Heating	48 dB
Heater		PTC
Control Type		Wireless Remote
Heating		Yes
Dry		Hot‧Cool
Ventilation		Yes
Timer		15/30/60/180/360 (Minute)
Filter		Alleru-buster Filter
No. of Motor / Blade		1 / 1
No. of Exhaust Outlet		1
Net Weight		4.7 Kg
Installation Size		242 x 238 (mm) 9.53 x 9.37 (inch) (H x W)

FAQ

🙋 How to Register for Warranty Service (Online)?

For online warranty registration, please visit our official website to access the registration page: https://forms.gle/8dVbcXQpQNJp6rTt9 within 10 days from the date of purchase.

🙋 How to Register for Repair Service (Online)?

For product repairs, please contact Customer Service Hotline at 852-2406 5666 for assistance.

🙋 How to book On-site Sighting Service?

On-Site Survey Service:
* To schedule a survey, please contact Customer Service Hotline at 852-2406 5666.
* The survey fee will be fully refunded if you proceed with the installation through SHUN HING.

🙋 Installation Service:

For installation appointments, please contact Customer Service Hotline at 852-2406 5666.

🙋 How to book Cleaning Service?

For a professional cleaning appointments, please contact Customer Service Hotline at 852-2406 5666.

🙋 How to Purchase Accessory?

For accessory pruchases, please contact Customer Service Hotline at 852-2406 5666 for assistance.

🙋 Pair the Remote Control with Product

The remote control must be paired with the product before use. Within one minute after the product is powered on, press and hod the buttons "Heat" + "Vent" on the remote control for 3 seconds to complete the pairing process. When the pairing is successful, 3 "beeps" will be heard.
If the remote control was just replaced, power off and restart the product and then repeat the above pairing procedure.
If the remote control does not operate as expected, please contact Customer Service Hotline at 852-2406 5666 for assistance.

🙋 Filter Clean Indicator "Blink"

When the filter cleaing indicator at the receiving part of the main body blinks, it is time to clean the filter according to setting of the main body. You need to clean the filter.
(When the accumulated running duration reaches 2,200 hours (continuous running about 3 months),the filter cleaing indicator will blink.)

🙋 Clear the filter cleaning indication at the receiving part of the main body

Press and hold the "MODE" button at the receiving part of the main body for 3 seconds. A "beep" means the filter cleaning indication is cleared.
The accumulated time of the filter cleaning indication will be reset, and the time will be accumulated again.
Each time cleaning the filter, you are advised to reset the accumulated time of the filter cleaning indication. (Press and hold the "MODE" button for 3 seconds. A "beep" means the resetting is done.)